...door lock problem. The power door lock on the driver side does not work for the driver door, but will unlock/lock the rest of the doors. When we try to unlock/lock it with the key from the outside it ...
remote. Wont lock with the lock/unlock button on the door panel. Can only lock manually or with the key in the key hole. My vehicle is a 2000 toyota 4 runner. Replace the door lock actuator, it is bad
door power lock wont work. My drivers door power lock wont work on my 2000 toyota 4 runner. I have tried locking and unlocking with the door lock button on the control panel and also with the auto key
...each of the door where the lock is. you can take it to a key cutting shop and they have a sray that they put into your locks and in a few minutes it should unlock it with the wiggling of your
...door locks should cycle ( LOCK then UNLOCK) once-- indicating successful programming. If the door locks don't cycle, or cycle twice. Repeat steps 6a and 6b--this remote has not been accepted. c. ...
...door locks should cycle ( LOCK then UNLOCK) once-- indicating successful programming. If the door locks don't cycle, or cycle twice. Repeat steps 6a and 6b--this remote has not been accepted. c. ...
...i have a problem of central lock. i can't lock with my remote and other i lock my door with key that time three door lock but opposite of driver side door dosn't lock. please give me a solution. ...
...of the door open and put in some rubber wedges that look like door stops, then with a heavy wire like a coat hanger they try to catch the power door lock switch or the lock lever itself. good luck, ...
door lock controller, it is gone so I was also wondering if I can find myself another and if that might work for me instead of having to fix the manual issue. I am looking for a way to lock and unlock
503 questions posted
Usually answered in minutes!
676 Questions
427 Questions
430 Questions
361 Questions
348 Questions