...timing marks lined up and I have the mark on the cam shaft pulley but no mark on engine 2 line the cam shaft up with Hey NewK, Try looking under the Cam Pully If ya got the radiator out Its at the ...
...timing marks all line up nice. has 150 psi in all cylenders. am stumped at this point ........ You might want to look for a vacuum leak on the intake manifold. You also might need to hook up a scope ...
...timing belt will have white marks on it that will line up with all of the marks on the pulleys when they are in the right place so its nearly impossable to do it wrong 1997 subaru outback All Data ...
Question about Cars & Trucks
...six cylinder engine rocking number six valves ) fit new parts, tension belt, (TIP) now turn engine twice by hand , recheck that timing marks line up . saves a lot of time if you find they don't
...line the timing marks on the 1.7 ltr. sohc on my 2004 honda civic ex, has timing belt there is a timing mark on the timing cover that lines up with the mark on the crank pulley (i believe the mark is ...
Timing marks setting Hyundai Lantra can anyone tell me how to set the timing marks for a 1996 Hyundai LANTRA (not elantra) 1.8L.. Specifically the cam timing marks where do they set at? Or post a link
...timing on my 97 dodge neon. do i rotate the the crank 1/2 notch counter clockwise or three notches on a 2.0 SOHC no notches . line up all the marks and put belt on. tighten tensioner. rotate crank 2 ...
Question about Toyota 4Runner
...line) on the timing belt (4). NOTE: When timing marks are aligned, No.2 piston will be on Top Dead Center. 014RW003 Legend (1) Alignment Mark on Oil Pump (2) Groove on Crankshaft Timing Pulley (3) ...
Question about Nissan Cars & Trucks
...line back up like book said,also tightened tension before rotating It is normal to have to set the timing marks a couple of times before you can say they are right. If at first they don't pass the 2 ...
...2 marks as well that line up do not take off the timing belt until you have all the marks properly lined up then you can remove the belt but do not turn over the engine without installing the new ...
682 questions posted
Usually answered in minutes!
676 Questions
427 Questions
361 Questions
348 Questions
361 Questions