...cover on it normally the same side the fuel filling tube is at or in the glove box or in the center console if it has one. Just push it in if it clciks you know you have fixed the no start condtion, ...
...need a 10mm socket to pull them. They can cause problems, they led to mine spinning a rod bearing. I didn't realize they were bad until after rebuilding the motor. After the rebuild my oil pressure ...
...Need: 2 camshaft timing clamps (#J38613-A) Set of metric ½-inch drive sockets Set of metric 3/8-inch drive sockets Set of metric ¼-inch drive sockets ½-inch drive ratchet ½-inch ...
picture diagram of the parts and where the screws are and where the vacuum motors are located that control the vents. To try to tackle this without seeing it first would be your first mistake, and the
...picture of any housing in the repair manual. As for the plug wires They will become oil soaked over a period of time. This will short them out and cause a misfire in the engine. I would recommend ...
280 questions posted
Usually answered in minutes!
1,131 Questions
1,082 Questions
1,047 Questions
517 Questions
500 Questions