2002 Saturn Sl "sl1 intake manifold gasket" Questions

sl1 idles at 2000 rpm in park intake manifold gasket needs to be replaced. i would seek professional help as this is a pain to do yourself

...sl1. i cleaned out the intake manifold and throttle body, replaced all the gaskets and now it idles at 3000 rpms. what could cause this? Cleaning it out has nothing to do with it. IAC does which ...

...SL1 manual shift Saturn. I recently changed the radiator hoses, installed new spark plugs and wires. The engine now idles at 1700 rpm when first turned on and settles at 1100 to 1200 when warm. What ...

...SL1 manual. I've replaced the IAC, PCV, and TPS. I'm still getting idle levels between 2,500-3,000 RPMs. The car runs fine other than when idling but it gets really loud at every stop light!! Any ...

...SL1 HAS NO PICK UP WHEN YOU ARE DRIVING, WHEN YOU ARE AT A STOP AND GO TO TAKE OFF SOMETHIMES IT WILL PICK UP SPEED GREAT AND OTHER TIMES NOTHING . I am not a car expert by any means, but sounds like ...

...intake manifold gasket. This is a very common problem with the SL/SL1 engine. There are only three bolts around the #1 cylinder and no bridge in the block between #1 and #2 cylinders. The flexible ...

...sl1" Check for intake manifold leaks and carbon in EGR pipe and EGR. ==== Check for vacuum leaks on intake manifold, the air tube between the air filter. intake manifold vacuum hose. === clean ...

...SL1 I am experiencing very high idle (2000 rpm warm - higher cold). I have cleaned the throttle body and the idle air control valve with no improvement. What next, replace the idle air control valve? ...

SL1 check engine light came on and code P0303 which is Cylinder 3 misfire detected. I changed the spark plug and spark plug wire and still P0303 comes up. Is there something else I should be checking?

...sl1? First disconnect the air vent to the throttle body. The TB will come off with 2 10mm bolts. Dont lose the gasket. Undo the throttle cable, and 2 vacuum hoses on top. Be careful not to lose the ...