2002 Saturn Sl "shifter cable" Questions

shifter cable bushing 1999 Saturn SL1 1.9 manual...bushing broken/missing on shifter cable. Can I fix/buy just the bushing, or do I need to get the whole cable? And which one there are so many? Hello:

...Shifter may be at fault? Bushings all seem intact at cable ends. It's the Lt cable that controls the side to side movement that doesn't have enough through to get trans to slide all the way out to ...

...shifter cable has broken (specifically the plastic loop) you can replace it with a new one from Ebay. Just look up "Saturn Bushing Man" and select the Shifter Cable Eyelet loop. It is a part that is ...

cable for shifter pull the console out and take a good look at the bushings which connect the shifter to the cables. before you buy a shift cable kit take a look at a saturn shifter bushing repair kit

...cable to the shifter knob, this breakes, you can go to Saturn ,but they want almost $200 for both cables (they don't sell the plastic piece) BUT THERE IS GOOD NEWS, Napa sells the plastic replacement ...

...shifter all around no gears to be found There is a bushing held in by a pin which attatches to a cable lingage. The cable and linkage fell apart . Its mainly a plastic bushing that came out The ...

...shifter/cable connections and movement,then verify the cables move the linkages properly at the transmission . These cables are a fairly common failed part and sold as the set,these are a dealer item ...

...shifter thta hooks on to the manual transmission cable and where can I buy it Take a look on ebay for a saturn shifter repair kit. this was a common problem on S series manuals from 91-99. There were ...

...cable to the shifter has failed. This is a plastic bushing and can be reattached if the tabs are not broken. You need to remove the console to access the cable end, the bushing goes through the ...

...cable unlocks the shifter allowing it to move (safety thing). Remove the shifter console and inspect for foreign objects in the shift linkage. While inspecting with the key on (not running) keep ...