2004 Kia Optima "sorento intake removal" Questions

Sorento with V6 has the spark plugs located under black plastic covers in the center channel of each cylinder head. Several brackets, cables, and hoses must be moved out of the way to access them. The

Where is the Intake manifold runner control valve located on a 2011 Kia Sorento Kia Sorento Intake Manifold Removal and Installation

this is the part

...Sorento. Do I have to remove the throttle body to get at the middle spark plug on the passenger's side and if so, do I need to replace the gasket afterwards or can I reuse it? Be careful there.. If ...

...sorento? The reservoir Y hose is at the back of the engine, how do I get to it! first you can unbolt the overflow bottle on the pass side outside near airfilter assmbly as well if you want more room ...

show spark plug instalation do you have to remove the intake to instal plugs should not need to.try acess through weel wells.

...Sorento, engine code P2021 after oil pressure switch replacement. Any idea what could be causing this? So.... I had my oil pressure switch replaced today, and now have a check engine light on. It was ...

...sorento Hi there...i don't have room to post the complete diagrams here, but i can walk you through the steps. It's a little harder for a do it yourselfer than most cars, because the intake ...

...gasket bad head---look and determine if water pump is flowing coolant Common problem on Sorentos is the coolant return line is clogged. Remove the small hose going into the coolant ...

...Sorento Mass Air Flow (MAF) sensor is located in the air intake plenum assembly. This sensor is combined with the IAT sensor. Check this removal and installation procedure (first disconnect the ...

...sorento HI there , Just curious to know if it's necessary to replace the intake gaskets when you lift the intake manifold off to replace the oil switch ? Thanks Yes, you always replace gaskets when ...