1999 Saturn SL "headlights dim connect relay bright" Questions

dim headlights quit working but the brights are ok any solutions to this problem? I have checked the fuses and relay all are ok brights work fine but no power to dims clean connections on bulbs Need ...

...headlights work on bright but not on dim. Fuses are good Had this once...Check voltage at plug on dim side to see if you have power. If so, check continuity thru head light. (I had both headlight low ...

...Headlights are dim to non existant Replaced the all fuses except the relay fuse. put in new bulbs, when we turned on the lights they were bright for about 2 seconds then went dim again. So dim that ...

...dim. All new ultra bright bulbs and new headlight assemblies. What can I do to have safe low beams? You need to check voltages at the headlight connection and see what they are. If they are low then ...

headlights do not come on, this started intermittantly. Switch has been replaced, fuse ok, bulbs changed. Is there something else in the circuit? A relay perhaps? Look under the hood. There is a large

headlights. One works on dim and the other works on bright. I've replaced both headlights and it did not fix it. What do I do next? On the head lights one works on dim and the other works on bright. I

...dim. It looks like who ever had this truck before put in a regular pull out headlight switch instead of the one on the steering column. The one one the steering column only worked the park lights for ...

...dim side have electria current on both wires to the blub bright beams function normal if you have power to both headlight plugs for each low and high beam filaments and the ground is good as you say ...

headlights pulse while the engine is running Pulse? you mean the elevation mechanism is oscillating? or the lights go dim and then bright like you were constantly on the dimming switch? if this, there

headlights should come on bright, then dim only slightly when the starter engages. Remove the battery cables and clean all corrosion off the terminals and connectors. The lead must be bright and shiny