...engine bolts (1, 3, 5, 6) and stud (2). Fig. Remove the upper transaxle to engine bolts (1, 3, 5, 6) and stud (2) Safely support the engine. Remove the transaxle mount to transaxle bolts. Fig. Remove ...
for the 2.2L engine you need a 3/8 ratchett or use the belt removal tool fit it in the square slot on tensioner rotate counterclockwise. the 3.0 engine you have to use a box end wrench rotate to right
...3.14 5. Socket Set Steps: Step 1 Open the hood and locate the fuel filter. If the fuel filter is not in the engine compartment, follow the fuel line from the tank until the fuel filter is located. - ...
whats the firing order for spark-plugs for saturn vue 06 3.5L Firing order: 1-4-2-5-3-6. 2.2L and 2.4L Engines Firing order: 1-3-4-2
coolant warning. If that IS the reason for the engine light, after cycling (car gets to normal operating temp then completely cold) the car about 3-5 times the light will go off on it's own. Good Luck
ENGINE LIGHT CAME ON & SUDDENLY LOST POWER. DROVE TO MECHANIC, HE DIAGNOSED A #2-#3 MISFIRE & CHANGED THE IGNITION CONTROL UNIT, IGNITION COIL, AND SPARKPLUGS. DROVE HOME & ENGINE LIGHT ...
...in with the cooling fans. When the coolant temp increases it turns on the fan. It is usually located around the thermostat housing or screwed into the engine block with a 2 or 3 wire connector on
...engine mount. If you remove the right front wheel, there is an access panel held in place by plastic push pins. If you remove this panel, it is very easy to remove the belt by attaching a serpentine ...
...3 ignition coils(black circular units- 6 units total) atop the sparkplugs with an electrical connector attached. 4-Cylinder: They are located atop the engine and at the center. There is a black ...
559 questions posted
Usually answered in minutes!
1,183 Questions
693 Questions
496 Questions
452 Questions
276 Questions