...ignition switch. 2. Close all doors. 3. Open drivers door 4. Insert key and turn to ON position and within 10 seconds turn key off and remove key. 5. Within 20 seconds Close and open drivers door 3 ...
ignition switch to ON position. 2. Locate the ECU (Engine Control Unit) and press and hold the ECU PROGRAMMING button for 3 seconds. The ECU will be located under one of the front two seats, the trunk
Question about Mercury Cars & Trucks
...ignition switch on my 04 mercury Monterey I lost keys so had to break ignition switch out replaced with new on but the car won't start. The dash lights come on but can't get it start.tried to reset ...
...ignition switch transition from OFF to RUN. You must turn the ignition OFF before attempting to start the vehicle. With a master vehicle key, start the vehicle. The vehicle has now learned the key ...
Question about Honda Accord
...ignition switch (tumbler,plastic casing, and the black exciter transponder) the key was found. We reinstalled the original parts, and attempted to start the vehicle. The DIC, right above the stereo ...
IGNITION SWITCH - HIGH EFFORT IGNITION KEY INSERTION/REMOVAL AND/OR KEY CHIMES SOUND WITH DOOR OPEN AND IGNITION KEY REMOVED Publication Date: OCTOBER 15, 1998 FORD: 1998 CONTOUR LINCOLN-MERCURY: 1998
switch on the door. Step 3: Insert key into the ignition. Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds.
Question about Pontiac Cars & Trucks
ignition switch and key Have you tested with your volt meter and a suitable load ............. You replaced the computer? which computer ,PCM/ECM - engine computer I'm assuming .Was it programmed. You
...ignition switch from Position 0 to ON 6 times within 10 seconds. 2. Then turn ignition switch to OFF position. Leave key in ignition switch. 3. After 2 seconds, the system will enter programming mode ...
...ignition switch to the ON position, marked II. 2. Press the LOCK button. 3. Turn the ignition switch to the Off position, marked I. Do this three times! Next, turn the ignition switch to the ON ...
2,046 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions