2005 Jeep Wrangler "turn signal relay" Questions

Ad

Question about Jeep Wrangler

1 Answer

turn signal switch or a bad connection. When you try the turn signals, do they light up and not blink? -If so, probably the flasher unit. When you try the turn signals, does nothing happen? -Check the

Ad

Question about Jeep Wrangler

2 Answers

...turn signal lever but when I release the pressure they come back on. I also pulled the fog light relay to shut off the lights. Unfortunately, I believe the only solution is to replace the turn signal ...

Ad

Question about Jeep Wrangler

2 Answers

...work but not turn signals Fuse, relay or turn signal switch. I want you to switch the flashers with each other. Then go buy one at walmart to replace the bad one. hope it will help you.. ...

...turn signal, fuse, bulbs and still can not get the low beams working. it will turn on hi beams for passing but will not stay on either. turn signals, running lights, tail lights, and dash lights all ...

turn signal post pulls out and twist to turn on but will not turn off. They should only burn when parking lights or headlights are on. Had to pull the fuse. Hey I am having the same problem with my 02

...be a relay on the hazard light switch, is this true? I checked the bulbs and they are fine now and installed correctly. Previous owner installed backward. It sounds like the turn signal switch is

...signal from the crank or cam sensor, it will turn off power to the relay which in turn shuts off power to the fuel and ignition system. Unlike those in many passenger vehicles, it's not connected to ...

...turn signal, and I don't know how to check that. Any ideas? There seems to be a problem on the power side. You should have at least one terminal at the relay that is hot. The switch activates the ...

turn signal flasher on my 95 Wrangler. Neither one will come out of the fuse box freely even after "considerable" pressure applied to withdraw them. Beginning to suspect there may be a release of some

My LH turn indicator makes an expedited clicking noise when I turn it on and it doesn't signal. RH side is fine... there is a very good chance it is your relay.

Not finding what you are looking for?
2005 Jeep Wrangler Logo

342 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...