2005 Jeep Wrangler "remove glove box" Questions

...glove box must be removed. It is removed by slipping the glove box strap off the hook and letting the door roll down off its hinges. To reinstall, position the glove box door at an 8 o?clock ...

...Remove the glove box door strap and remove the glove box door by letting it drop towards the floor while supporting the door and it will release from the dash. Then you will see the blower motor ...

glove box out look to the bottom right there will be several harnesses down there, the one you are looking for is held in by 2 bolts (8mm i believe). Remove those two bolts, it will be tricky (there's

what fuse is for what Check the backside of the glove box when removed for the fuse box legend.

...remove the box. The fuse is marked. Something like "Dome lt. elim." I think it's located one up from the bottom right. This can actually be done without removing the glove box. For a more permanent ...

...jeep wrangler!! Help !! it is accessable from the passenger side just under the dash. remove the glove box to help with access, held in with four 8mm screws, remove screws and it just pulls right

...glove box, should have 3 to 4 wire plug on connector about $25.00 part, but very hard some times to access to remove and replace (look for a square looking module attached to the fan motor it's

...Remove the glove box from the instrument panel (Refer to 23 - BODY/INSTRUMENT PANEL/GLOVE BOX - REMOVAL). Pull out the lock on the blower motor resistor wire harness connector to unlock the connector ...

...remove it?? so I can replace it.? there is a resister box up and under the passengers floor board behind the glove box. if it burns out you wont get any speeds but i would check the motor itself ...

fix... it is located behind the glove box. it is also common for the switch/connection to be corroded or cracked... if you have any difficulty i would be happy to add more info about removal/install..