2005 Jeep Wrangler "fuel level tank sensor" Questions

Ad

Question about Jeep Wrangler

2 Answers

...problem. need advice . CODE PO463 IS FUEL LEVEL SENSOR FAULTY OR SENSOR WIRE HAS A SHORT. check the spark plug wires n on the ends of them they could be broken sending a bad signal to your

Ad

Question about Jeep Wrangler

3 Answers

...level is proper and, the cap is in fair or good condition, i would advise to move in the direction of the cooling fans and sensors as well. These fans are vital to the cooling process as well. The ...

Ad

fuel level sensor electrical connector retaining clip (6). 8. Disconnect the fuel level sensor electrical connector (7) from under the fuel sender cover. 9. Remove the fuel level sensor retaining clip

Question about Jeep Wrangler

1 Answer

...Fuel level sensor circuit harness is open or shorted - Fuel level sensor circuit poor electrical connection - Faulty fuel level sensor in fuel tank (most common cause)P0463 DescriptionThe fuel level ...

...fuel level as determined by the PCM. The IPC receives a class 2 message from the PCM indicating the fuel level percent. The fuel gage defaults to empty if: • The PCM detects a malfunction in the fuel ...

...fuel level sensor Sensor electrical connector from under the fuel sender cover Fuel level sensor retaining clip Squeeze the locking tangs and remove the fuel level sensor. Remove the fuel pressure ...

...fuel level sensor Sensor electrical connector from under the fuel sender cover Fuel level sensor retaining clip Squeeze the locking tangs and remove the fuel level sensor. Remove the fuel pressure ...

Question about Jeep Wrangler

1 Answer

fuel level sensor How do I replace the fuel level sensor? It is located on the fuel pump module which is located in the fuel tank. The fuel tank will need to be removed from the vehicle in order to ...

Question about Jeep Wrangler

1 Answer

...fuel level sensor/sending unit and the fuel tank pressure sensor are located on or in the fuel pump module. The fuel tank will need to be lowered in order to gain access to the fuel tank pressure ...

Question about Jeep Wrangler

1 Answer

...to empty This problemis always caused by a defective fuel level sensor. The level sensor islocated of course in the gas tank. To change the level sensor you must remove the gas tank from the

Not finding what you are looking for?
2005 Jeep Wrangler Logo

342 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...