1993 Subaru Impreza "window motor hot" Questions

...u remove window motor from track , most times u have to remove three rivets by drilling out. hopefully switch is bad and u can bypass switch with a piece of wire from hot lead to hot lead on

...window motor gets extremely hot causing the window to not roll up or down. When unplugged and allowed to cool, the window works for a few seconds. Car does not have to be running for the plugged in ...

...to put window up or hot wire motor. (one way goes down, other polarity up) ask for how to hot wire, (do so connector at motor pulled) use a jumper wire with 15amp inline fuse #18 gage wire or

...window motor faulty thanks Les Not familiar with this car, but first you have to find the power wire to the switch-that will be one end of your jumper wire. Use a test light clipped to ground, turn ...

...MOTOR WAS EXTREMELY HOT The window is stuck on something this can happen easy. Check window for some place that it is binding. The motor was hot because it tried to move but couldn't. Clear up the ...

the door panel and use the hot wire off the switch (You might need some wire for this) But connect the hot wire to the window motor it self!!! and it should roll up if not you got a bad window motor!!

...window. The motor should not have a ground wire, unless it is a new motor. All motors up to about 1980 - had only one hot wire ( with the exception that a few window motors had two wires, one to make ...

window motor is take the panal off and with two long wires from the battery un hook the motor plug and place the ground on first and with the hot wire place in on one prong and iff nothing happens put

window motor. One will be hot the other ground, reversing them will make the window go the other way. Typically though it's the motor thats bad, not the switch. You may even try tapping on the door or

how do i hot wire power window motor connect power to one side and ground to the other side