1993 Subaru Impreza "loose pulley car engine" Questions

...pulley just doesnt come loose. has the mechanic had the pulley off for any reason in recent history? timing belt replacement? water pump? if it was not torqued properly, thats the reason. there not ...

...works loose and detensions the belt. Rotate the engine till to top dead center on the pulley, and see if the cam pulleys are at the timing marks. If the belt has slipped, you WILL have bent

...pulley. This allows cool air into the alternator for cooling. If the fan belt is loose then you can adjust the Alternator. It will have a locking bolt and be attached to the engine with a long bolt. ...

...pulley loose, if the bolt holes are not elongated, just tighten it back up. If the damper is loose, remove it from the engine (puller usually necessary) and inspect the crank snout and the alignment ...

...pulley has worked loose or separated, you'll need to replace any damaged components, possibly including the pulley, mounting bolt and even the crankshaft and front engine housing could have been ...

Engine pulley came loose The engine pulley came loose. Is the problem the alternator or air-con and how will I know what one caused it. worry about the fix and not the cause.

my idler pulley is very loose and serpentine belt not holding I can wobble my idler pulley is it broke do not start engine as will cause engine damage if tensioner is loose will nock the timing out

loose your belt,check the tensioner pulley and idle pulley for a frozen pulley,it is not normal to loose a belt,you need to find why you loosing the belt,let me know,so i can assist you with some info

PULLEY BOLTS LOOSE.IF CRANKSHAFT PULLEY LONG BOLT TORQUE IS FOR 130 FT LBS FOR 1.8L ENGINE. IF YOU HAVE THESE ENGINES CRANKSHAFT BOLT TORQUE IS 174 - 181 FT LBS ENGINES ARE 3.0L 3.2L 3.5L 2.3L 2.5L IF

when it is sitting in idle. Cant find anything loose. Any ideas? either a pulley or belt is worn could be a bearing on a pulley different reasons check pulleys or spray belt dressing on belt maybe....