2004 Jeep Grand Cherokee "remove lock cylinder" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...remove the lock cylinder. Fig. Fig. 3: Using a small thin bladed tool, press in the ignition lock clinder retaining tab ... Fig. Fig. 4: ... then pull out the lock cylinder from the steering column ...

Ad

...lock cylinder with the plastic end of a scrwedriver (with the key removed). then insert the key and try to start. Try this several times. If you get it to turn immediately replace the igntion lock ...

Ad

...remove ignition lock switch when it is stuck in the locked position You will have to remove the steering wheel, lock plate, turn signal switch,  and lock bolt for the cylinder and remove the ...

Question about Jeep Grand Cherokee

1 Answer

...lock cylinder broke remove the trim inside your door .put an old key in the lock to help to pull it out.shine a torch on the inside of your door after removing the trim.you cylinder can be held on ...

...Grand Cherokee external lock cylinders Where are the external lock cylinders located for 1999 Grand Cherokee Any where you use a key to enter the car. Remove the door panel to see the lock

Question about Jeep Grand Cherokee

1 Answer

...require a new key and lock cylinder.for repair you will need to remove steering wheel and work your way piece by piece till you get to lock set. you will need some special tools to remove some

...lock position and remove the key and key cylinder. Step 6 Install your old key cylinder into the new ignition switch assembly. Make sure the contacts in the cylinder and assembly line up. Reattach ...

Question about Jeep Grand Cherokee

1 Answer

...lock cylinder into their proper place to move the cylinder into the starting position. Or your steering colum is locked and the wheel is moving freely as if it were not. So your solution would be to ...

Question about Jeep Grand Cherokee

1 Answer

Hose the inside of lock cylinder with WD-40 and try again. If this doesn't work, attack it from the inside. Remove inside door trim, remove retaining clip that holds the lock in place then pop it out

Question about Jeep Grand Cherokee

2 Answers

...lock cylinder where the key goes in then retry. if this does work you should have the lock cylinder replaced soon as it has internal problems I had the same problem today - January 30th 2009. what i ...

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

3,696 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...