...sensor (1). Remove the CKP sensor and the O-ring seal from the engine block. Remove the CKP sensor pigtail. Observe the routing of the pigtail. Gently pull the CKP sensor pigtail down through the ...
...Remove nuts retaining A/C condenser core to the radiator. 8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM. 9. Raise vehicle on hoist. 10. Remove ...
...sensor out of the way. Remove the air cleaner assembly. Remove the cooling fans. Disconnect the radiator inlet hose from the radiator.Disconnect the radiator outlet hose from the radiator. Disconnect ...
Question about Cadillac Catera
...Remove nuts retaining A/C condenser core to the radiator. 8. Disconnect engine control sensor wiring from the auxiliary electric cooling fan motors and the CCRM. 9. Raise vehicle on hoist. 10. Remove ...
...Remove nuts retaining A/C condenser core to the radiator. Disconnect engine control sensor wiring (12A581) from the auxiliary electric cooling fan motors and the CCRM. Raise vehicle on hoist. Remove ...
...Remove oil level sensor and oil filter. Disconnect front exhaust pipe from manifold. Remove right front wheel and splash shield. 2. Disconnect oil cooler pipes. Disconnect A/C compressor electrical ...
Remove nuts retaining A/C condenser core to the radiator. Disconnect engine control sensor wiring (12A581) from the auxiliary electric cooling fan motors and the CCRM. Raise vehicle on hoist; refer to
...sensor lower shield retaining bolts (if equipped). Remove the remaining oil pan retaining bolts. Remove the steering shaft pinch bolts and separate the steering shaft. Position a transmission jack ...
...sensor. 15. Remove the low oil level sensor, if required. 16. Clean all sealing surfaces on the engine and the oil pan. Refer to Oil Pan Clean and Inspect. INSTALLATION PROCEDURE NOTICE: Refer to ...
349 questions posted
Usually answered in minutes!
465 Questions
351 Questions
270 Questions
166 Questions
2 Questions