timing marks on the sprockets line up to the encasing. Timing Belt Cover, Belt & Sprockets Removal & Installation 2.5L Engine To Remove: Remove the drive belts. Remove the A/C compressor drive
...timing belt off? Thankyou! they should be marks on the cam gears take the #1 plug out take a long screwdriver put in cyld. hole have someone turn crank with wrench till it gets dead top and check the ...
...timing marks the engine seem to not want to rotate....feals like it might be toughting piston to valves. it sounds like your crank timing is 180 degrees out you need to take the belt off and turn the ...
...information or questions. Feel Free to contact me at FixYa.Com! ...
Question about Subaru Outback
fuel filter, and that was good. Any suggestions, before I tear it all apart again and re-time it?? Sounds like your timing marks are incorrect, make sure align with the MARKS, not the DOTS on the cams
timing replaced water pump.... trying to install timing belt... need timing marks they are on the pullys and the backing plates for cams. on the gear and block for the crank.
...timing marks. got camshafts lined up crankshaft will not come to 12oclock stuck at 11 oclock the pistons are hitting the valves. your timing is not set correctly. the timing is too involved to tell ...
what timing marks to use on a subaru outback 2.5 2001 This page should answer any timing question. http://subarudrivers.net/viewtopic.php?f=17&t=21
I have a Subaru Van 700 and the Cam belt had broke . I found the timmig marks on the pulley of the can shaft and set it to tdc and fit new belt but no luck . After o long time trying to start this ...
393 questions posted
Usually answered in minutes!
315 Questions
235 Questions
223 Questions
176 Questions
139 Questions