Question about Jeep Grand Cherokee
...and the key wont turn the ignition You had to put pressure on the key like you are attempting to turn it and then tap on ignition rite next to the key. It will jar the tumblers back into place and ...
steering wheel wont unlock and key wont turn from park position the tumbler system is at fault consult a local mechanic.
...wont turn off, hi i had parked my grand cherokee laredo 6cyl for about a month, battery died and jumped it to start, drove it for awhile to charge the battery, as i returned home turned the switch to ...
...key out of the ignition and it wont lock how. How do I remedy this? Hi there, to remove the ignition lock, remove the steering colomn trim, insert the key and turn to position 2, there is a small ...
key wont turn in the ignition Hi, first try using the key both ways to see if one side is worn out. Then if that does not work, try putting some dry graphite in the lock cyl and wiggling the key. You ...
...KEY IN THE IGNITION AND TRY TO TURN IT; IT WONT TURN AND THE STEERING WHEEL IS LOCKED WHAT DO I NEED TO DO TO GET IT UNLOCKED? take a small hammer and with the key removed tap the lock cylinder. then ...
...key wont push the tumblers inside the key lock cylinder into their proper place to move the cylinder into the starting position. Or your steering colum is locked and the wheel is moving freely as if ...
...tumbler pins. Try turning the key while tapping on top of the switch with a rubber mallet or sneaker. If it frees up, you need to remove the keyswitch and take it to a locksmith to have the pins ...
Question about Jeep Grand Cherokee
key or tumbler in ignition switch try scanning it. post the DTCs you get. or its all guess work. $$$$ what does , does not work mean? key will not turn or the SKIM light glows telling you NO GO SKIM.?
3,837 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,521 Questions
2,639 Questions