...ignition switch This could be the problem. If the ignition switch is bad your car will not run. All of the electricity in your car runs through the ignition switch and if the switch is bad it can ...
Question about Jeep Grand Cherokee
Ignition switch won't release key when it is put in park. But when I removed switch and key tumbler, the key tumbler/cylinder releases key. Why won't the key release when it is in park? ...
...ignition switch out to put new one in. How to remove an ignition cylinder for repair or replacement if your Grand Cherokee's ignition won't turn. This is due to the tumblers failing. Key must ...
...ignition switch as the issue. A week later dealership #1 replaced the module (even though I thought it might be the starter). Two weeks later it let me sit again and this time they said it was the ...
...ignition switch. If the starter is turning over but the engine just won't start, you need to figure out what is missing. It either is not getting any fuel or not getting any spark, or something ...
ignition and it stopped and 10 minutes later repeated over and over...it's doing it now! HELP! This could be three things. 1. The relay is stuck, this is under the hood and is probably not the
Question about Jeep Grand Cherokee
...ignition is turned off, the tone remains. Hi, First of all, I take it you are using your seatbelt. There is a small micro switch in the bottom of the seatbelt plug. Check that it`s still in place. ...
...ignition switch or from the keyless entry module (if equipped).Then on the other hand, if they LOCK OK, but do not want to UNLOCK (or visa-versa) there could be worn or burned ...
Question about Jeep Grand Cherokee
...for corrosion because it has just clicked prior to that. But sometimes, it acts as if the ignition switch is failing as it won't even make a click and attempt to start. Its got to be a loose
3,837 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,521 Questions
2,639 Questions
