1994 Jeep Grand Cherokee "adjusting bars torsion" Questions

...torsion bars are there to absorb and create ride height. the shock does nothing more then return the wheel to the road. simple and inexpensive. 2 Possible issues: When the tires hit a bump, it causes ...

torsion bars I set the adjuster key perpendicular with the lower control arm as in tangled down. The correct reload would be to have the key level with the ground? or is the setting I started with ...

...adjusting bolt, and it will accommodate a large-sized socket driver. Step 3Adjust the torsion bar. Turning the adjustment bolt clockwise will tighten it, raising the amount of load that can be placed ...

adjusting arm the same number turns recorded earlier, then remove the tool. This loads the torsion bars. Install the transmission shield, if removed. Remove the jackstands and lower the vehicle. Check

I didn't mark the torsion bar when I took it out, how do I install it without the marks When removing the torsion bar, I didn't mark it. How can install it without the markings? jack the car right up ...

...bars both lock nuts are loose but wont move is the wedge type washer threaded or not when adjusting torsion bar suspension ,the secret is to jack the car completely off the floor so that the wheels ...

torsion bars can be removed and replaced,trial and error style,until it's right.The thing that changes where the ride height is,is WHERE the adjuster end is,when the torsion bar is fitted to it.I have

...of the vehicle will lighten the load on the thread and make turning easier remember that adjusting the height if the vehicle by adding extra tension to the torsion bars will alter the wheel ...

...Adjusting the torsion bars will throw the camber off and eat up your tires. ... Besides, those suckers have some *serious* torsion on them. Without the proper tools it will sned you clear across the ...

...torsion bars and a sway bar, but I do not know how to adjust them to make it sit level. Any help on this one? Thanks Glen Adjustment is made by way of the torsion bar adjuster at the rear of the ...