...way out Torque to 44 ftlbs then an additonal 95 degrees start inside and work cross pattern out. I need the Torque spec's for a 2001 Pontiac grand am se 3.4L motor I need both Heads and Manifold ...
...pattern, torque the first stage to 65 ft. lbs. then torque the final stage to 95 ft lbs. P.S hopefully when the flywheel was removed there were corresponding marks that identify the position the ...
need torque specs for flywheel Cross pattern, 95 lbs.
...pattern. YOu will also need to be conscious that the motor you are getting the 2x4 has been broken in on 2 wheel drive and a 4 wheel puts more torque and strain on engine.... so be sure once placed ...
Question about Cars & Trucks
torque on a 5.3 chevy, all the 1 thu. 10 are 3.94 head bolts. I understand 22 ft. Ibs. And I think 90 de..is a qtr.turn .like 12 to 3 so were does 70de. Put me at 2 o'clock. Yes 70 is 2 o'clock follow
...torque converter bolt pattern b4 installation. Lastly,be sure that the dip sticks are the same........ALL the part's on both transmission's are interchangeable,change as necessary. yes same ...
what is the torque on a 95 ford escort pressure plate? TORQUE IS 13 - 20 FT LBS. TIGHTEN BOLTS GRADUALLY IN A CRISS CROSS PATTERN.
Question about Jeep Wrangler
..... after push brake pedal a little you should see RPM raise 300 to 400 rpm. shift pattern is 1st gear ,second gear,3rd gear and lock up(torque converter clutch). 4th gear with lock up hope it ...
Question about Cars & Trucks
...pattern, replace flywheel same think happened, Help? Flywheel will brake driving along the road with no banging or sound. The perfect circle looks like it was cut with a tool, The torque converter ...
torque specs and sequence for 78 ford 400 cid cylinder head 1st step 75 ft/lb 2nd step 95 to 105 ft/lb - start at center two bolts and work out in a z pattern. IE if the bolts are numbered 10-6-2-4-8
765 questions posted
Usually answered in minutes!
635 Questions
532 Questions
469 Questions
339 Questions
340 Questions