1997 Jeep Wrangler "fuel line" Questions

Ad

...fuel lines go from the hard line on the side of the frame? The two lines are pick-up & return. If the two pipes are different thicknesses, then probably one pipe will be a good fit on only of the ...

Ad

...fuel line coming from the pump at the carburetor, place a clean can under the line, and have someone operate the starter--you should have fuel shoot from the line in spurts as the engine turns. If it ...

Ad

Question about Jeep Wrangler

2 Answers

LINE FROM THE FUEL PRESSURE REGULATOR. REMOVE THE FUEL RAIL ASSEMBLY FROM THE ENGINE. IF YOU HAVE AUTOMATIC TRANSMISSION REMOVE THE THROTTLE PRESSURE CABLE AND BRACKET TO REMOVE THE FUEL RAIL ASSEMBLY

fuel lines keep blowing out in 95 jeep wrangler having problems with the fuel lines continually blowing out? fuel pressure regulator is bad or there is blockage in the lines

...fuel line was blown out with air compressor. fuel pump is new Make sure you have the lines attached correctly on the sending unit and make sure there no small holes in the line. The pump pulls fuel ...

Question about Jeep Wrangler

2 Answers

...fuel return line that caused my 95 YJ to do the same thing. It was getting flooded after a few short miles, and would not start for a while. You can buy a fuel pressure gauge and check the fuel ...

Question about Jeep Wrangler

1 Answer

Replace fuel lines from tank Fuel lines stuck on frame please say what you are trying to do.???? what does stuck mean.? (rusted to frame ,clamps bad? what?) the lines have fittings and are clamped to ...

how to replace a fuel pump on jeep wrangler (95) i'm pretty sure jeep had their pumps in the tank. you can phone parts place to double check. If it is in the tank, you will have to drop the tank in ...

Question about Jeep Wrangler

1 Answer

...Fuel line leak I dropped the tank and replaced the fuel regulator. Connecting all the hoses back up was a no brainer, however the fuel line to nipple on the fuel regulator is leaking. When I turn the ...

fuel line to be replaced. Rubber hoses will have clamps on both ends that should be loosened with screw driver. Nylon and steel lines will have a ferrule at both ends removed and replaced using proper

Not finding what you are looking for?
1997 Jeep Wrangler Logo

765 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...