1997 Jeep Wrangler "check transmission fluid" Questions

Ad

check or add transmission fluid in the manual transmission the check/fill plug is located on the left side of the transmission possibly on the right depends on the transmission its about mid way up on

Ad

...transmission dip stick, clean it off, reinsert, remove and check level. as long as it's in the hash marks don't add any fluid. The reservoir is part of the trans. To check or fill the automatic use ...

Ad

Question about Jeep Wrangler

3 Answers

...you Manual Transmission is low on fluid so you will have detailed instructions on how to check and fill the transmission. there is a rubber plug on top of the gearbox should be fairly ...

Question about Jeep Wrangler

1 Answer

...Manual transmission use DOT3 brake fluid for lube). Check to make sure there isn't any water or debris in the transmission fluid.Check the striking rod for damage. Gear is sticking or

Question about Jeep Wrangler

1 Answer

...Add about 3 to 4 quarts Depending on size of transmission,start engine check fluid level while engine is running (should let it warm up) Add fluid as needed to fill to full line. Do not

Question about Jeep Wrangler

3 Answers

...transmission you are looking at 10 half total.Be sure you check the fluid in neutral and not park. fill with 4 quarts then while engine is running continue to add little at a time until you read the ...

fluid leak. Where do I find the fill hole on a 2003 Jeep wrangler sahara? check passenger side of transmission - it is a 3/8 ext that will fit the bolt - does not really look like a regular fill hole

...transmission fluid pressure- check fluid level of trans while parked with engine running and the jeep level.- if level is ok- might be time to have filter and fluid changed P0870 is an Overdrive ...

Question about Jeep Wrangler

1 Answer

...transmission doesn't catch 2nd gear right away, forcing the engine to rev up until it catches 2nd gear. Check the level and condition of your tranny fluid. Check the level with the car running, in ...

Question about Jeep Wrangler

1 Answer

...transmission. Use in-line wrench to tighten replacement line and be careful not to overtighten and strip the fitting. Run motor for a few minutes, when warm check the fluid level. 'DO NOT'

Not finding what you are looking for?
1997 Jeep Wrangler Logo

765 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...