...bank 1 sensor1 my question is where is bank1 sensor1 on a mercury montannier 98 v8 Bank 1 is always on the same side as the number 1 cylinder. Bank 2 is the other side of the engine. Sensor 1 is ...
2003 merc mountaineer error code p0171 what dose that mean System too lean bank 1. Either vacuum leak or bad O2 sensor bank 1.
...1.6 for bank 1. The light comes back on within 3 days of clearing codes. It seems to run fine. Any suggestions? this vehicle has a fuel pressure sensor on the fuel rail. the sensor has a tendency to ...
...Bank 1".Most likely you have a bad O2 sensor on bank 1(driver's side).There are 2,replace them both to make it easier.(My guess is the sensor before the catalytic converter is the bad one,if you want ...
...Bank (1) Pass Side Bank (2) Drivers Side Sensor (1) closest to engine Sensor (2) monitor sensor in outlet of converter An O2 Code does not mean it is bad or needs to be replaced. Could be any number ...
Bank 1 Sensor 1.Is that not the drivers side upstream sensor Yes, that one is between exhaust maniflod and before the catilice converter, some where in between there, not after converter. bank 1 means
...oxygen sensor & remove by looseningwith a 22mm wrench or 7/8"Bank #1 right sideBank #2 left sideDo both front upsteam sensors together,not therear monitorsRock Auto.Com --for sensors NTK or ...
Question about Mercury Mountaineer
...bank 1 02sencer #2 i replace but still getting c help have a 98 mercery mountaineer 5.0 If you have replaced the oxygen sensors and code remains try having the code cleared by OBDII diagnostic reader ...
which sensor is the lean sensor in bank 1??? Are you referring to the oxygen sensor? If so which one?
check engine light o2 sensor bank 1 what side would that be the right side or the left? replacing both front and back Should be right
866 questions posted
Usually answered in minutes!
658 Questions
555 Questions
377 Questions
323 Questions
250 Questions