1999 Jeep Wrangler "3 torque converter" Questions

torque converter) went out before i got it hm, is this a norm caused by the soleniod, or could it be something more, the jeep is a 4.0, with the 3 speed automatic tranny Your transmission should still

...torque converter.If you have a 3 speed auto you are looking at 9 quarts total.If you have a 4 speed transmission you are looking at 10 half total.Be sure you check the fluid in neutral and not park. ...

torque converter clutch solenoid on a 1999 Saturn SL2. Which and where is it located? This won't be a fun job. Notice this guy stated he took him about 5 hours and I think he is pretty knowledgeable. ...

...torque converter and valve body.. tried already with good condition tcm but still p0731exist stock car? stock tire sizes???????? not hacked with those hacking tools?"superchips, yahdah yah? DTC codes ...

...torque: 40 ft. lbs. (54 Nm) with 9.5 in. 3-lug converter 55 ft. lbs. (74 Nm) with 9.5 in. 4-lug converter 55 ft. lbs. (74 Nm) with 10.0 in. 4-lug converter 270 in. lbs. (31 Nm) with 10.75 in. 4-lug ...

...Torque converter clutch solenoid valve circuit is open or shorted - Low transmission fluid level - Dirty transmission fluid P0753 DODGEP0753 DODGE - 3-4 Shift Solenoid ...

converter have to do with it? It should shift 4 times. 1-2, 2-3, 3-4 Then you will feel the torque converter clutch lock up which feels like a shift. The torque converter locks to increase gas mileage

...a clutch,,, thus the name TCC torque converter clutch. So to help you out just unlug the sensor/solenoid and it will stop locking up your converter. Problem solved! MOney saved 2 to 3 hundred

3 times Did you make sure the torque converter was properly seated on the input shaft of the transmission. In oder to do this you need to spin the torque converter and push it into the transmission so

3 and 4 is engaging but not driving Hello and welcome to FixYa! If that's the case, then the torque converter is surely worn out. The torque converter controls the shifting of the car. If it's