lights blinking on/off BCM Body Control Modules were bad to go out on Chryslers causing blinking as well as only one side to work at a time. Could have corroded connection and the BCM itself may be ...
...car and it did the same thing when i got it take it to a dealership there are 2 flashes for the bcm body control module that will recalibrate the automatic temp contol and that should fix the ...
Question about Chrysler 300M
all the light on instrusment panel are on,none of the gauge work. replace the bcm, it didn't fix all the problem, fuel gauge will not work, the air bag light on,air condition will not work right. Fuel
...COLUMN IF IT WAS DAMAGED ITS NOT GOING TO START THERE IS A MODULE THAT HAS TO MATCH UP WITH THE BCM IT SENSES THE KEY AND SENDS A SIGNAL TO THE COMPUTER TO START.THEIR ARE THINGS YOU CAN DO LIKE ...
no tail lights or dash lights 300m problem could be in the BCM.BUT LOOK FOR BLOWED FUSE TO THE PANEL CONTROL BUS.
I put in a new window motor and stopped working out of no where the BCM is the Body Control Module, the locks and windows and almost everything else runs through the BCM, no this is not a fuse problem
where is the bcm on a1999 chrysler 300m it is attached to the interior fusebox, they must be removed as an assembly and separated outside of the vehicle
how do i reset the bcm on a chrysler 300m? leave batery disconected for 2 3 hours
Question about Chrysler 300M
...i was not prepared to pay the next $3500 to start pulling it apart to supposedly replace the bcm and then whatever else it really is. I suspect it is a key problem as occasionally it randomly ...
...can be accessed. I looking at the fuses I can't see any of them burned out. need to replace the bcm that controls all of steerin wheel ...
1,408 questions posted
Usually answered in minutes!
395 Questions
313 Questions
272 Questions
170 Questions
107 Questions