...reverse lights on my 2005 honda crv are out. i changed the bulbs and the fuse and still no luck. i assume there is a switch associated with the gear shift (automatic transmission) that may need to be ...
Honda CR-V 1998 I replaced the reversing light bulb, but it failed to come on when put into reverse gear. I also checked the fuse under the dash board by replacing with one of the spare fuses, still ...
...the bulb and turn it counterclockwise, then pull the bulb out of the holder. Replacement is exact reverse of
...D (Drive light) It has been intermittently flashing & remains flashing even when car is place in Reverse. Only stops when car turned off and restarted. What does this mean? Thanks. relay switch ...
...should get power on one and ground on the other when you operate the switch. The polarity should reverse when you operate the other direction. The blue wire is a pulsar wire to give motor feedback ...
reversing light not working have changed bulb no good how do i identify fuse nothing marked as such in box the best way is to, pull 0ne fuse out at a time. then replace, until you find a blown one, ...
...the black bottom by depressing the side inserts. Pull out the bulb, and replace. Reassemble in the reverse manner. The entire job should take no more than 3 to 4
...was a very slight burning smell but no smoke. it is a 2002 Honda CRV if it does not go forward or reverse, and it does not feel like it's engaging any other gears, then your transmission needs ...
...lights sort of dim and get bright again very quickly. It's getting worse over time. you forgot, does it do that running engine or not.? ok the main battery is car is doing that. use a voltmeter, at ...
...lights are easily accessed and replaced. To reassemble, simply reverse the process. [Note: there is no cover for the bottom screw on the rear door hinge side. It is exposed. There are two possible ...
370 questions posted
Usually answered in minutes!
547 Questions
447 Questions
400 Questions
370 Questions
337 Questions
