2004 Jeep Wrangler "engine rpm" Questions

Ad

Question about Jeep Wrangler

1 Answer

...rpm. the engine has almost no power at that rpm. the normal cold start (winter) is about 1500 RPM. if not at fast idle fix bad fast idle (Bad IAC) when i say bad IAC that means the system IAC is ...

Ad

...engine speed jumps to 2000 rpm then slowly goes down to 1000. It does not matter if engine is warm or cold. Also my temp. control on my heater will not turn the heat all the way off. I have warm air ...

Ad

...engine stalling after starting and stopping and jerks after acclerating at 1 st and 2nd speed Does that mean it does not stall or **** in 3rd gear? The difference between low RPM and high RPM is ...

engine rpm will increase, hence, the oil pressure will go up, as required, and as expected. There is nothing wrong with your engine, unless the oil pressure goes excessively high under any regime. Low

...rpm 15 is engine stalled, or rpm of oil tanker ship. got a MANUAL stick or automatic slush pump gear box? but is no way to answer. you. its a hydromatic A/T. right>? AUTO? if yes,it has. no ...

...rpm after warmup no service engine light but check guages light comes on momentarily when rpm gets low and oil press drops. Changed fwd 02 sensor and idle air control valve at mech. suggestion, also ...

...RPM's with the engine block cold, the oil pressure will be completely on the right side of the gauge. After the engine warms up, the problem goes away. You need to have a mechanical test gauge hooked ...

Question about Jeep Wrangler

1 Answer

engine miss above 2000 rpm after a receint overhaul, I have a engine miss at 2000rpm and above. If you accelerate, it takes off and runs fine untill you level off, then the miss returns. It has new ...

...engine is idling at the lowest possible rpm without stalling before making adjustments, then when finished, bring idle rpm up to recommended rpm using those. On an older carb, usually the idle screw ...

...engine requires 10 psi of oil pressure per 1,000 rpm ( ex. 20 psi at 2,000 rpm, 25 psi at 2,500 rpm, and so on ) . If the gauge is moving back and forth erratically at idle , i would say the gauge is ...

Not finding what you are looking for?
2004 Jeep Wrangler Logo

383 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...