Question about Jeep Wrangler
turn signals, hazard, tailights, brake lights, parking light, dome light and instrument panel all work....checked every relay and fuse, checked the brake light switch, replace the turn signal switch..
Question about Buick Cars & Trucks
headlight switch turned on (all bulbs lite). Neither l or r turn signals work in front only, rear turn signals work fine.! replaced flasher module, dtr module, bulbs Take it to a qualified repair shop
2000 dodge caravan turn signal dont work brake lights work running lights work headlights work ...4ways work ... no turn signals I would check the fuse and for power at the turn signal switch.
...turn signals don't work left or right the flasher has gone bad. It is easy to replace as it just plugs in under the dash. Go to any auto parts store and buy a new flasher and ask the clerk to assist ...
My 2000 Blazer low beam headlights won't come on .High beams, fog,running, turn signals all work fine. Try changing the headlights....some headlight high beams will work even when the low beams dont
Question about Jeep Wrangler
...on in my 89 c1500 no other lights work, When i turn the headlights on all other lights like signal,brake,reverse lights dont work anymore. Sounds like you have a short in your lighting ...
turn signal works fine Sounds like you have a bad left rear light bulb, as far as the Left Front headlight i would check to make sure you have power and grounds at the connector, if you dont trace the
...turn signals Installed new headlights assemblys, everything worked fine on the old ones before replacement but replaced due to foggy lenses. Now the new headlamp Turn signals dont work and tail light ...
Question about Jeep Wrangler
...REAR LIGHTS DONT BUT TURNING SIGNAL AND REVERSE LIGHTS D MY TRUCK REAR LIGHTS DONT WORK TURNING SIGNAL WORKS REVERSE LIGHTS WORK BUT WHEN U TURN ON HEADLIGHTS REAR LIGHTS DONT WORK look for bad ...
Question about Jeep Wrangler
dont work but headlights and turn signal do Check for battery voltage at the light socket. if ok replace bulbs ,if no voltage check blown fuse or faulty cable or connection. if it's hard wired (ie not
281 questions posted
Usually answered in minutes!
635 Questions
545 Questions
532 Questions
469 Questions
339 Questions