2001 Jeep Wrangler "starter" Questions

Ad

...starting my 2000 Jeep Wrangler I hear a clicking noise but that is all. I was told to tap on the starter solenoid while turning the key but I don't know where the solenoid is located. Can yo tell ...

Ad

...start engine. all other electrical works. when i turn the key. nothing happens Before blaming the starter make sure the battery is fully charged. It should be around 13V. Starter circuits for the ...

Ad

have a 95 wrangler 4.0L cannot get the starter to turn over everything is hooked up correctly and still nothing but a loud clicking noise and battery gets hot sounds like the starter is bad tap the ...

...when key is 93 wrangler won't start. no clicking when key is turned. is that definitely the starter? Battery is brand new (measures 12.4 V) If the battery is brand new then yes, the starter ...

turn key get nothing jump starter and sylenoid just spins Is the starter relay bad if the battery is good but nothing happens when you turn the key, when i jump starter with key on sylenoid just spins

Question about Jeep Wrangler

1 Answer

grinding i replaced the starter and silinoid the starter grinds and spins any idea what this could be this is the fifth starter could it be the fly wheel It could be the flywheel, but try putting ...

Starter activates when battery wire connected and starter is grounded to frame with or without solenoid wire connected. No short between posts on new starter. Only does it when the power source is ...

1992 Jeep wrangler, 4.0L HO, manual transmission, replaced Key cylinder, starter switch(on steering column), starter relay, starter soleniod, rebuilt starter, and still have same problem of ...

2004 jeep wrangler SE start circuit will not pull in the starter Is your starter good? What happens when you try and start the jeep? Does the starter just spin? If so you have a bad pull in winding on

Question about Jeep Wrangler

1 Answer

Does a 1998 Jeep wrangler starter require a shim? Replacement starter is leaving a 3/8 " gap when mounted. You likely don't need shims in fact that will make it worse.The replacement starter is likely

Not finding what you are looking for?
2001 Jeep Wrangler Logo

281 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...