2000 Jeep Grand Cherokee "wrangler running 3 cylinders" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

...wrangler? Hi, there are bleed screws on the cylinders located on the top and back of the brake plate right where the brake line is attached. Have an assistant pump up and hold the brake pedal, open ...

Ad

...wrangler 6sp, 3.8L v6 , nice rig. easy to fix too. there are 2 parts. (3 really) engine make too much heat, (limphome or timed wrong) air in system. cooling system. the rad pressure test pass and the ...

Ad

Question about Jeep Grand Cherokee

2 Answers

wrangler , Cherokees/.? what? what engine?, we cant guess engines, and it dont run so......????? cranks ok. battery charged.,? to 12.6vdc rested? everyone love to guess, no spark, so crank sensors....

Question about Jeep Grand Cherokee

1 Answer

...wrangler engine code P0301 P0301 - Cylinder 1 misfire detected........P0302 - Cylinder 2 misfire deteced, and so on........so either it is a current misfire, which you would be running on 4 cylinders ...

...wrangler 1. Fill master cylinder reservoir with DOT 3 brake fluid. Raise and support vehicle. Attach bleeder hose to bleeder screw on bleed line of slave cylinder. See Fig. 1 (attached in link) . ...

Question about Jeep Grand Cherokee

2 Answers

...wrangler, just replaced the master clylinder and slave cylinder but i continue to have problems after my jeep sets for awhile, the transmission will not go into gear, if i pump the pedal about 30 ...

Question about Jeep Grand Cherokee

3 Answers

...wrangler There is a bleeder on the drivers side of the transmission follow the tube from the clutch master cylinder if you cannot find it. Pump the clutch up and hold it down then open the bleeder ...

...Wrangler 4x4 4 cylinder 2.5 TBI carburetor standard transmission. The jeep will start and run fine for about 3 to 5 miles and then shut down. all the gauges still work but will not start. I let the ...

...wrangler within the last year the clutch assembly and components have been replaced. I let my vehicle sit for about 3 weeks and now the clutch will not disengage. It is almost like it has air in the ...

Question about Jeep Grand Cherokee

2 Answers

...wrangler 4.0, has a misfire code P0302 Misfire code P0302 on cylinder 2, however I replaced the injector and it didn't seem to fix anything. It has a really rough idle, and struggles under a load ...

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...