2000 Jeep Grand Cherokee "solenoid change car jerks 1st" Questions

Ad

...change noticed. Is this a solenoid pack problem, or a worn out seal that is causing the cluth to hang? Pls help. Check the kick down cable. If it sticks the transmission won't shift. I sprayed WD-40 ...

Ad

Question about Jeep Grand Cherokee

1 Answer

...better but when you make a complete stop and push the gas to go it jerks so bad like i have been rear ended can u help me with a suggestion Govenor pressure solenoid and transducer fix alot of

Ad

Question about Jeep Grand Cherokee

1 Answer

...change a first-second gear solenoid on a 95 ford windstar transmission? When shifting from 1st to 2nd the van jerks and makes a loud clunk and revs up to 4000 to 5000 rpms before shifting ITS NOT A ...

Question about Jeep Grand Cherokee

1 Answer

...car jerks when I take off. Is this common or is something in need of repair ??? Check the trans fluid for quantity and color. If it is not a good red color, try having it changed and get the filter ...

Question about Jeep Grand Cherokee

1 Answer

...solenoid, which might be creating, so it can be fixed by aroung 250 -300 , so i asked him to check for colour of my transmission oil and level, he said, its good not to worry, So, I dont know what to ...

Question about Jeep Grand Cherokee

2 Answers

...solenoid valve, or worn out transmission fluid. I would recommend that you change the fluid and filter as this should resolve the issue. Seafoam makes a transmission treatment that will not harm your ...

...1st gear and it jerks into gear then again before it goes into 2nd gear. After that it's fine. It runs great on the expressway but in local traffic it's frustrating because it has no pick up. I ...

Question about Jeep Grand Cherokee

2 Answers

...solenoid, which might be creating, so it can be fixed by aroung 250 -300 , so i asked him to check for colour of my transmission oil and level, he said, its good not to worry, So, I dont know what to ...

Question about Jeep Grand Cherokee

1 Answer

solenoid 3. Replaced the tranny fluid and filter MERCON V While I had the Tranny pan off I discovered 1. silver (teaspoon full) fine metal shavings on the magnet After I changed the fluid and filter I

Question about Jeep Grand Cherokee

2 Answers

change. But this whole time once the truck would start moving tranny would function at 100%. No sliping, jerking, jamming or anything. But then problem started to get worse. Truck would have to rev up

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...