bad oil pump and is gonna cost me a lot of $$$. have a 2000 jeep grand cherokee with 84,000 miles. started having issues with oil pressure gauge going crazy up and down, beeping. had oil pump replaced
...warning light comes on low on oil or sending unit bad or sump in oil pan stopped up or bad oil pump i had the same problem its your oil pressure sensor by the engine i replaced it and no problems ...
bad oil sending unit or bad oil pump. change the oil first. see if the noise goes away.If not you may have to replace the oil pump by removing the oil pan. You will have loosen the motor mounts so you
...oil pump is going bad or what. Due for an oil change so I would plan on replacing the pump when I change the oil, if that is a possibility. The noise is what is confusing. Maybe 2 different issues? ...
oil pump was bad. And that just replacing the pump would not fix the problem do to black sluge from engine oil. Only 165,000 miles on engine. replaced engine new oil pump, plugs, oil pan, ect. Now was
Question about Jeep Grand Cherokee
oil pump is bad, your engine would probably be making a knocking sound as if it's going to break apart. 1st change your oil and filter. If that doesn't solve the issue, replace the oil pressure switch
...Bad oil pump or excessive clearance in main/connecting rod bearing. However if you are getting this reading from the oil pressure guage. It may be FAULTY or the oil pressure switch may be bad bad. To ...
...oil pump... Pumps become "bad" when debris from a failed component gets into it, causing damage. (exception being pressure regulator spring/plunger assembly becoming clogged with gunk in engines that ...
Question about Jeep Grand Cherokee
...it easy to replace the oil pump is in the oil pan, if you have all the tools not to bad, but if you have a the right tools its a pain in the but.. probaly should take it to a shop.. good luck
oil pump. 99% of all pumps do not fail by themselves. Replacing the pump will often raise pressure for an hour or so but the problem will shortly return. The cause is a worn bearing, allowing pressure
4,475 questions posted
Usually answered in minutes!
3,350 Questions
2,899 Questions
2,715 Questions
2,521 Questions
2,639 Questions