2000 Jeep Grand Cherokee "new ignition switch car wont" Questions

Ad

Question about Jeep Grand Cherokee

3 Answers

new key cylinder without the switch. Beware you would have different keys for the ignition/doors unless you had the re-keyed. I must asume you, tryed Moving the steering wheel. Left and, right to take

Ad

Question about Jeep Grand Cherokee

3 Answers

...new distributor cap and still nothing. Later Monday night we got home and just out of curiosity tried to crank the car and it started right up. Tuesday drove it to school and after school it again ...

Ad

ignition switch itself has two mounting bolts that connect it to the steering collum loosen these two bolts and slide the switch forward towards the steering wheel as far as it will go.  hold the

...new starter, battery, neutral safety switch. took the alternator out and check that out and it was fine. all my fuses are good and the starter relay is good also. this happen to me abnout a month ago ...

Question about Jeep Grand Cherokee

1 Answer

...ignition lock, remove the steering colomn trim, insert the key and turn to position 2, there is a small button under the lock press this and pull the key, this will remove the lock, you will have to ...

...Ignition Lights Come on but wont crank I have a 1998 Jeep cherokee sport when I turn the key the auxiliary comes on but the engine wont crank, nothing no noise but the auxillary does come on. Brand ...

wont start i got new batterie its not that could it be ignition switch Could be many many things. Check for spark, check for fuel pressure. If it turns over fine I wouldn't worry about the battery.

Question about Jeep Grand Cherokee

1 Answer

new starter in and have power everywhere just wont start Hi, I will try and be of some help to you. The starter has a big terminal on it , which should be live at all times ( +cable from the battery )

Question about Jeep Grand Cherokee

4 Answers

...callum Your reply really sucks. you need a new starter motor I just put mine in the shop for the same thing. Give it day or two and i will post what they find. im guessing ignition switch or ...

Question about Jeep Grand Cherokee

1 Answer

...on top of the switch with a rubber mallet or sneaker. If it frees up, you need to remove the keyswitch and take it to a locksmith to have the pins replaced. Much cheaper than a new ignition

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,469 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...