2000 Jeep Grand Cherokee "display shown" Questions

Ad

Question about Jeep Grand Cherokee

2 Answers

display, what does it mean? No shown in owners manual? this could be a low tire indicator check your tire pressure in all for tires they are setup so they activate if a tire gets 3-5 pounds lower than

Ad

Question about Jeep Grand Cherokee

1 Answer

display reads check or service 4 wheel drive and wont come off.transmission has 100,000 kilometers on 2005 jeep cherokee overland hemi 5.2 engine, and transmission has been flushed recently.Sometimes ...

Ad

...shown in the FSM. this car the PCM sense oil pressure data via the PCI bus to the cluster and then it displays this data. im not sure which years return to zero. the PCM gets its DATA from the oil ...

Question about Jeep Grand Cherokee

1 Answer

shown by the Check Engine Light (CEL) on the dash.1. Turn the ignition ON-OFF, ON-OFF, and finally ON again (without starting)2. Codes will be emitted via CEL on the dashboard display.3. Read codes as

Question about Jeep Grand Cherokee

2 Answers

...display in the center console and the door open will be shown. The wore to the switch going though the door hinge area can and does break and now the switch does'nt apper to change deflault is door ...

...shown in the display may reflect the calculated distance (in miles) or time (in days) remaining. When the maintenance service term has been exceeded, this value is preceded by a "-" (minus symbol). ...

...display is shown on the multifunction display . 3. Press the Reset/Illumination Button 3 times. (You'll hear an audible beep and the voltage is shown on the multifunction display.) 4. Turn key in ...

Question about Jeep Grand Cherokee

1 Answer

...shown on the display is correct, press the FM1 and AM buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons. The radio should unlock and be usable ...

...II 1.9l dci. Why isn't radio info shown on the instrument cluster display after replacing the display for malfunctions? The steering wheel radio commands seem not to work at all Wiring ...

...shown. While pressing the trip meter reset button, turn the "ENGINE START STOP" switch or engine switch ON.Without multi-information display Continue to press and hold the knob until the trip meter ...

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...