2000 Jeep Grand Cherokee "connect dg controller" Questions

Ad

...connect a jumper between the DG/BK wire and the dark green/white wire. You should hear the fuel pump running. If not there is a problem in the DG/WT wire from the relay to the pump. Okay, lets assume ...

Ad

...the Jeep in neutral ...it started right away. Good luck Test the alternator charging capability by connecting a volt meter to the battery terminals and starting the engine. The voltage should be at ...

Ad

Question about Jeep Grand Cherokee

2 Answers

CONNECT AND PUT BACK TOGETHER. pLEASE HELP Mark 1) ECM Fan Clutch 1) K160 18BR/OR Park Lockout Solenoid Control Green 1) BR / OR = Brown/Orange unit with Green 2) K900 18DB/DG Sensor Ground 2) Black 2

Question about Jeep Grand Cherokee

2 Answers

p0351 ingnition coil ciruit problem intermentent problem 1. Disconnect the voltage regulator connection at the alternator assembly and start the engine to see if it runs better or not and to see if ...

...DG). TEST the system for normal operation. If the right rear stoplamps are illuminated, REPAIR circuit 5 (OG/LB). TEST the system for normal operation. If the left rear stoplamps are illuminated, GO ...

...DG) wire and the Yellow/Red (Y/R) wire. 3. Install a 2nd jumper wire between the Dark Blue/Orange (DB/O) wire and a Black (BK) wire. Either BK wire of the module should work, both are dedicated ...

Question about Jeep Grand Cherokee

2 Answers

...connect the wire harness and install the new stereo you need to run a wire from the red ACC wire on the stereo to the NBS relay in the fuse box under the hood. That's it! Good luck. Sorry I have no ...

...DG), harness side and ground. Are the voltages greater than 10 volts? Yes GO to A2 . No VERIFY the BJB fuse 110 (30A) and the CJB fuse 13 (10A) are OK. If OK, REPAIR the circuit. TEST the system for ...

...panel fuse panel. The windshield wiper motor is: Attached to the cowl top extension (021A36) . Connected to windshield wiper mounting arm and pivot shaft (17566) . The turn signal and windshield ...

...DG), harness side and ground. Are the voltages greater than 10 volts? Yes GO to A2 . No REPAIR the circuit(s) in question. TEST the system for normal operation. A2 CHECK CIRCUITS 57 (BK) AND 676 ...

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

4,475 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...