...battery is dry and clean. If you need to clean the terminals, get a battery terminal brush and clean the post and the cable ends so there is a clean positive connection on both terminals. You can ...
...battery terminals are clean, replace the starter. (clean means on the inside of the clamps, not that they look clean on the outside)If you have remote solenoid, testing is done at solenoid, following ...
...battery ) If post, clean the inside of the post connector by using a battery terminal cleaning tool sold at the parts store for a couple of dollars. As long as your terminals are dirty or lose the ...
Question about Jeep Grand Cherokee
...battery posts are shiny clean and the terminals are tight moving the terminals on dirty posts is corrupting the cpu program in the ECM so try this make sure the battery posts are shiny clean the ...
...Clean the top of battery with soap and water.The acid on top of the battery can conduct electricity and cause the battery to drain down.If the battery cable and battery post are not shiney,they are ...
...which i will trace today. Dirty terminals connections increase circuit resistance and will cause heat. Clean contact surfaces on terminals and battery and you should have no more problem
battery for 12v, check that posts & terminals are clean and secure, Check starter relay in the power distribution center, make sure grounds are good at the engine end. Check for 12v at the starter
Question about Jeep Grand Cherokee
...headlights ? Clean battery terminals first, charge battery if needed, jump start it across the terminals of the starter with key on. Could be battery terminals needs cleaning, battery, or starter
4,475 questions posted
Usually answered in minutes!
3,350 Questions
2,899 Questions
2,715 Questions
2,521 Questions
2,639 Questions