...brake light switch. It's tough to get at. Located on the upper side of the brake pedal arm, under the dash. Brake light switch in brake pedal is bad or has come out of adjustment. Look just above ...
...brake light fuse in the main fuse panel. See the owners manual for location. Main one is under the hood. Secondary panel is on the passenger side kick panel area or in glove box. Replace the fuse if ...
...brake light switch under dash follow brake pedal up to steering column there u will find ur brake switch check that proper mounted than test switch and replace if bad Check operation of the brake ...
...switch on the pedal mounting that gets operated by the brake arm. Check that it hasn't come loose. Manually operate the switch and see if the brake lights go out. Adjust if necessary. Hope this
...brake light switch. Is there a way to remedy this? Thanks You can adjust the switch by putting your thumbs on either side of the switch plunger and pushing toward the brake lever. The switch shaft ...
Question about Jeep Grand Cherokee
...brake light switch have you check for power at the sockets for the brake light. if you have no power and as you say the brake light switch is good then you have a brake in the wire between the two ...
...brake light switch that is located just above the pedal arm. If it is a little out of adjustment, your lights will stay on. have you checked brake switch on brake pedal. if you go under driver side ...
brake lites bulbs o.k. check the brake switch on top back side of brake pedal. it is out of adjustment or is going bad. if bad or out of adjustment, brake lights will not work. adjust the brake switch
Question about Jeep Grand Cherokee
brake light switch may have gone bad, the switch is located under the dash attached near the brake pedal. If you go underneath the dash and follow the brake pedal lever around, you will see the switch
...adjust the switch closer to the pedal. The cruise control thinks you are stepping on the brake pedal. When your foot is off the pedal the switch should be clicked to an open circuit. When you apply ...
4,475 questions posted
Usually answered in minutes!
3,350 Questions
2,899 Questions
2,715 Questions
2,521 Questions
2,639 Questions