switch. The relay gets a signal from the computer. If there is no signal from the crank position sensor the computer will not close the relay. If it runs with the relay bypassed, chances are good that
Question about Jeep Wrangler
...switch sends 12v to starter relay coil and the PRNDL ground the starter relay coil at d13 ever wiggle the PRNDL by trying park or neutral to crank the N contacts are virgin still and may allow ...
...switch. Buy a relay for fog lights and it should have a diagram you can use. I'm not sure how you want the lights to operate. I would assume you would want this to be automatic with placing the ...
...click when you do? If it clicks, the switch is shorted on--replace fog light switch. If it doesn't click but the lights come on anyway, the relay is shorted on. Let me know if you have more
...switch the lights on and off repeatedly, while you listen for clicking under the hood with the engine not running. When you hear clicking, identify the relay by placing a finger on it as the lights ...
...relay, fuse is good Switch? both fronts DEAD. are high beams OFF< if not, this is normal. the relay has 4 pins what is the voltage on all 4 pins and magic happens, whats wrong. can i presume these ...
...relay. I have a similar problem. Fan switch does not work on any setting. Pulled the plug and test light was lit on four of the pins. Replaced blower relay but still not working. Anyone know how to ...
...switch without a relay? The fuse is good and I've tried 3 different flasher relays. If this is a Rubicon then fuse 20 is your power feed. Make sure the pnk/rd wire has 12v at the multfunction switch. ...
...switch. Make double sure transmission is in neutral. On many jeeps, under the hood is fuse/relay box. One of the relays is the starter motor. Pull the relay. With a pair of pliers, take a paper clip ...
720 questions posted
Usually answered in minutes!
635 Questions
545 Questions
469 Questions
339 Questions
340 Questions