2000 GMC Jimmy "riding motor engine keeps shutting" Questions

Ad

...motor mount. With the limited information you provided, I can only give a possible solution. The knock you hear might be the valves slamming shut (pinging) due the use of 87 octane gas. If it is a ...

Ad

...Motor That Is Dirty, Or Faulty. Good Luck sound like somone is taking u for a ride just by what u r saying i would take to your local parts house most will scan for free but if me change engine ...

Ad

riding down the road. But when I prepare to stop and take my foot off the accellerator pedal the engine shuts down. The motor will start right back up as soon as I turn the key but if I don't keep the

...motor will run for about 2-3 minutes. I thought it was my husbands air compressor but it wasn't. What is it? The cooling fan on the radiator is being turned on by the radiator temp switch. This is ...

Question about GMC Jimmy

2 Answers

engine. give it a little gas and it runs fine untill you let off the gas. usualy when it warms up or you take it for a ride and run the heck out of it for a short distance it will work ok, dose not do

...riding in the cornfields against the hot motor just steamed up. So we put it away to look at it the next day. Next day, we checked all the loose connections and we replaced the oil in it, but it ...

...engine management goes through the heater/climate controls. When the control starts to go bad you will experience many things from difficult starting to fan controls that only work on 1 or two ...

...engine/motor and associated components and transmission fluid cool. Prevents Over Heat, Flows through heater hoses, keeps heater hot Water H20 Water will Boil Evaporate Super hot mist will want to ...

...engine and restart. PLEASE HELP!!!! Tough times, can't afford a new ride right now. Thanks for any help Before you encounter this problem do you have problem starting the Jeep? Crank angle sensor and ...

engine light, which has been on half a year. Here's some details from my bill: (1) Intake Gasket set $107.95 Misc materials $21.00 2.1 hours of Labor The total cost to me was $345.00, and I definately

Not finding what you are looking for?
2000 GMC Jimmy Logo

1,950 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...