2000 GMC Jimmy "pulling abs fuse brakes work" Questions

Ad

Question about GMC Jimmy

2 Answers

abs once fuse is pulled and FYI the abs light and break light will stay on as well. Good luck I don't know a whole lot about abs brakes but I think you have to brake really hard to re-activate the abs

Ad

Question about GMC Jimmy

2 Answers

ABS brake fuse you are disabling other components as well. The ABS fuse supplies voltage to the brake switch that tells the ECM and ABS module the the brake has been applied. If neither of the modules

Ad

Question about GMC Jimmy

1 Answer

...abs fuse. This stopped the braking problem, but caused my cruise to quit, and my tach to malfunction. Does this sound like a wheel speed sensor to you? the abs control unit controls the speedo (tach) ...

...abs. brakes/ do not lock up the wheel, it unlock;s the wheel that stops rotating , ALSO new rotors or drums are shipped with a film on them that must be removed with watter& soap do not over ...

Question about GMC Jimmy

1 Answer

...hood fuse box...Try pulling the ABS fuse (60A)...Test drive the vehicle to see if it will perform braking wise until you can fix ABS...Send a comment and let me know how you make out... ...

...abs ( fuse ,relay) and the brakes will still operate normally except that when in extreme braking situations the wheels will lock up and steering control will be the same as pre abs cars ( side skid ...

Question about GMC Jimmy

1 Answer

PULLING INTO A PARKING SPOT one of your sensors is out on your ABS system. What will work until you want to fix it is to pull the fuses for the abs( the one from under the hood) and theres one you can

ABS fuse. I did, and it fixed the braking issues, but I lost braking lights. Why would an ABS fuse be tied into my brake lights? And is there a way around this? that shouldnt be, put the fuse back and

Question about GMC Jimmy

3 Answers

...pulling!!! ABS comes on all by it self at low speed braking, A GM defect with their brakes!!!! Sensor thinks the tires are locking up an puts on the ABS, my advice pull the ABS fuse the brakes work ...

Question about GMC Jimmy

2 Answers

...pulling battery cable to reset, no luck. abs motor stays on even when car off. Any way to disable this to allow safe use of car with abs to get it home for service? Just pull the abs fuse ,anything ...

Not finding what you are looking for?
2000 GMC Jimmy Logo

1,950 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1997 GMC Jimmy
1997 GMC Jimmy

1,123 Questions

1998 GMC Jimmy
1998 GMC Jimmy

1,127 Questions

1999 GMC Jimmy
1999 GMC Jimmy

1,104 Questions

2001 GMC Jimmy
2001 GMC Jimmy

838 Questions

1996 GMC Jimmy
1996 GMC Jimmy

768 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...