2000 GMC Jimmy "4 wire" Questions

...plug wire goes to? Firing order 1-6-5-4-3-2 ------------ | 2 4 6 | front | | | ------- | | | 6 5 || of | | 1 4 || | | 2 3 || | ------- | vehicle | | | 1 3 5 | ------------ Distributor rotates ...

My cylinder 4 keeps misfiring in my jimmy I changed the spark plugs but not the wire what can it be Check the #4 plug wire for short. Better if You change the wire and see if problem continues.

...4 wire connector on it...they can become intermittant...you can also check to see that the relay(also mounted near the fan and looks like a metal box with 4-5 wires on it) is properly plugged in and ...

...4 go through resistor, 5 goes direct from switch to blower motor.   check wire harness connector at resistor, it should have six wires five power wires that corralate with the five settings ...

...wire you to a 4-flat. If you need a bigger plug like a 6-way or 7-way, there are adapters. You can view these if you click here. If you are going to install a brake controller also, you will need ...

...wire firing order 2.0L engineFiring order: 1-3-4-2Distributor rotation: clockwise 2.5L engineFiring order: 1-3-4-2Distributor rotation: clockwise 2.8L engineFiring order: 1-2-3-4-5-6Distributor ...

... against the firewall/bulk head on the left you'll see a large black box. There is a connector with 4 wires going to it. There is a (almost) diamond shape piece of plastic with 2 bolts at each corner ...

wire diagram for the 4 wheel drive system ihave no 12 volt to the switch but i have 12 volts out of the fuse panel Power for the transfer case selector switch comes from the "GAUGES" fuse. It is fuse

1983 GMC Jimmy 4 wheel drive won't engage How can I lock in the 4 wheel drive on my Jimmy. I've tried wiring the vacuum canister open and it still kicks out of 4 wheel drive. Must be wear in front end

...with a 4.3 it ran fine now wont run at all unless you pull off number 4 spark plug wire then it runs but really rough replace plug wire set. wire is probably grounding out. do cap/coil at same