1999 GMC Yukon "special tools needed removing head" Questions

Ad

...head gasket is blown Do you have rear heat and a/c if so your heater core is leaking or one of the coolant lines to the rear heater are leaking. if coming from a drain its the heater core. Look under ...

Ad

Question about GMC Yukon

1 Answer

...special tool is needed to remove the injector sleeves out of the head. you will also need to drain the cooling system before removing the injector sleeves, so coolant is also needed. dealers have ...

Ad

...head and another special tool to remove and replace the valve seals. Have the shop do this job. The safest way is to remove the head and work on a bench. With the use of a special tool you can change ...

How to remove the base of a Nutri ninja IQ it has philips head screws and another that looks different,does it need a special tool yes there is special tools

...tools needed? unless your a acomplished mecanic ...i really suggest you not to get into that kind of job ,better-off just changing your all angin ,simplyer faster and speacially more relayable...so ...

...special tools needed to replace front pads. Are there any special tricks in removing the rotors or the pads such as hidden locks, clips, or key ways . i'v done the brakes on other makes but never a ...

...be a special tool that I need to be using... there is a variety of special tools out there swivalls extensions crows foot. a crows foot is a end wrench head that conects to your wratchet.try

Question about GMC Yukon

2 Answers

...head gaskets on the 1988 ford thunderbird 5.0 we are trying to disconnect the fuel lines that go to the fuel rail any ideas You need a special tool to remove them. Available at most automotive parts ...

...special tools for this job . remove the head and valves . One tool will be turned so that it fits in the guide and is slightly smaller than the guide outer diameter. The other tool will go around the ...

...special tools for removing the valve guides and to install the seals. They make a tool that screws into where the plugs go so you can put air into the cylinder and hold the valves in place to where ...

Not finding what you are looking for?
1999 GMC Yukon Logo

927 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2004 GMC Yukon
2004 GMC Yukon

524 Questions

2001 GMC Yukon
2001 GMC Yukon

309 Questions

2007 GMC Yukon
2007 GMC Yukon

326 Questions

1996 GMC Yukon
1996 GMC Yukon

238 Questions

2005 GMC Yukon
2005 GMC Yukon

255 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...