1993 Ford Ranger SuperCab "shift drive" Questions

...shift properly? Yes if the vehicle speed sensor is bad than the computer can what speed you are going .SO the shifting comes from the throttle position sensor instead and trans shifting will be ...

...drive it the shifting is hard going into 2nd and 3rd. It shifts fine when sitting still. Any solutions? Has anyone had this problem? Thanks the shift sinkcranizers are dry .may have to pull the ...

manually shift from 1st to 2nd gear then to drive then it seems fine this is a 2.3l 4 cylinder its a possibility, you have a bad modulator valve on transmission. that makes it shift to the proper gear

...shift my 1995 ford ranger manually because it isn't down shifting on its own is it ok to drive that way You need to run a fault code test on the automatic transmission. Go here to see how to ...

...drive. it also shifts hard from 1st. to 2nd gear. do you have any ideas why that is. it shift great before changing the flywheel Since all gears shift hard, and the transmission is in correctly (i ...

...drive it will shift through all the grears & shift into overdrive & it works but if you stop without shifting out of overdrive it stays in overdrive & you have to go to park & then drive to get it to ...

...drive 1500 rpm P0750 has to do with the Shift solenoid A its a circuit malfunction. Could be related to or caused by the wiring, shift solenoid, or ECM/TCM. P0755 is also a shift solenoid B issue ...

...ford ranger does not want to shift into 4 wheel drive when wet 1999 ford ranger don't want to shift into 4 wheel drive once it gets wet on deep snow check for worn or loose linkages .and grease

...shift fine if i start in first then second then drive but if i try to start in drive no go Timothy, Open circuit in electrical system, failed PCM/TCM, faulty or stuck shift solenoid, failed speed ...