1996 Nissan Maxima "clutch bleeding" Questions

SEE AIR BUBBLES CLEAR BLEED TUBE.REPEAT THE BLEED PROCESS UNTIL YOU SEE NO AIR BUBBLES.DONT LET CLUTCH MASTERCYLINDER GO DRY WHILE BLEEDING.IF SO YOU GOT START BLEEDING PROCESS ALL OVER.HOPE THIS HELP

How do I bleed the master clutch cylinder 1996 nissan maxima where is the bleeder? to drain the clutch? Drain or bleed? The bleeder nipple is on the slave cylinder. Fill master cylinder,leave the cap ...

my clutch going to the floor and not being able to put it in gear my master cylinder was empty i refilled that and pumped the clutch an it is still doin same thang what else could be the problem? Hi ...

...get itto go into first and very hard to get it into other gears. you are having problems with ur clutch, need to bleed or adjust, if its easier to change gears after steping on clutch more than ...

clutch pedal goes to floor and stays 1999 Nissan sentra 1.6 changed clutch presssure plate and throwout bearing surfaced flywheel has cable clutch have tried adjusting all ways ON A 2000 MAX 6 ...

...bleeding again, it's like new the clutch fluid shouldnt get that hot ever and when you bleed it u give the fluid time to cool down.it is kindof a guess but check trans.fluid level and antifreeze ...

...bleeding may make it work for a short time but is not a cure. After making any repairs you do need to bleed it though. (just like brakes) It seems the clutch master cylinder needs attention, an ...

bleed clutch need to bleed clutch how do i Go to AUTOZONE,get a bleeder kit,not much and it has instructions on it,easy to use.

I have a 96 nissan maxima, manual transmission. I had periods where the clutch would stay on the ground, and I would have to stick my foot underneath to get it back up. This happenend only ...

...bleeding your clutch pedal step by step fill clutch master cylinder .get another person to pump clutch pedal few times ,and hold it down As it is held down open bleed nipple on master cylinder first ...