2000 Ford Ranger SuperCab "compressor clutch engages tap" Questions

Ad

Question about Ford Ranger

4 Answers

compressor clutch engages. Once it does, it runs like a champ, but I have to deal with 15 minutes of hot, muggy air first... Any thoughts? Low charge or bad sensor telling the system it has low charge

Ad

...you go to turn it on, on a hot day. First, check the relay and fuse for the A/C compressor/clutch. Then have the system pressure checked. I've seen systems run low and the compressor will not kick

Ad

...compressor. If the clutch is bad, can I just replace it or do I have to replace the whole compressor? Thanks! There is too much air gap between the hub and pulley. Usually, there are shims under the ...

Question about Ford Ranger

1 Answer

compressor is locked in..Then if its not ,carefully tap the clutch while the engine is running and see if it pulls in..Also see if the pressure switch wires dont have a bad connection..Just wiggle the

...compressor. I am new owner and a/c light on switch comes on but no a/c clutch engagement. I checked blower door and fuses and relays. next is switch on dash, what would I be looking for here and if ...

...on but no air Check that the AC compressor clutch is engaging. It is electromagnetic and is also prone to seizing from corrosion. Sometimes simply giving it a firm tap and some lubricant can solve

Question about Ford Ranger

3 Answers

...Compressor Clutch "not turning". Listen for problematic sounds. Turn on the A/C, with the AC Button (Switch) "ON" inspect outer A/C Compressor Clutch is "engaged" and turning the shaft of the ...

...Compressor clutch should engage, if it does not, Stop the Engine, add more Freon and try again. If the Compressor Clutch fails to engage, you can continue again, but I would advise you Contact an ...

...clutch engage on the compressor when you turn the A/C. The A/C was working fine before and it hasn't been used over the past 4 months because it's been to cool. first id check see if hoses where it ...

...clutch will not engage. Any Ideas? I would like to "jump" the compressor to engage it, to see if the compressor even engages, but I have no idea what wires to jump. There is a plug in the back with 3 ...

Not finding what you are looking for?
2000 Ford Ranger SuperCab Logo

927 questions posted

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...