changed fuse still no lights or fog lights this sounds like the DTRL module is bad and needs replacing. the fog lights the bulbs them self could be burnt out or the switch for the lights has a problem
...).IN THE DASH. IF - - LIGHTS AREON AND THE FOG LAMPS ARE TURNED ON AND THE HEAD LIGHT GO OUT OR WONT CHANGE FROM DIM TO BRIGHT REPLACE HIGH/LOW SWITCH ON COLM. SAME PROCEDURE AS FOG CONTOL
...fog light an switch them out but i need to know how to connect the lights to the factory switch inside what do i need to do If your PU didn't come with factory installed fog lights then you will ...
...Fog lights worked fine before replacing battery. Any connection or just coincedence? Sounds like your multifunction switch (i.e. the stalk that has the fog light switch) has burned out. This is a ...
...light and fog light switch (all in one). The cargo light works fine! I cannot get the fog light switch to work (the light will not come on). I've replaced this switch, checked the relay (the relay ...
...switch off fog lights off if you push signal lever in but back on when you let off pressure disconnect under fender wells fog lights off but indicator on dash stays on I have a simular problem. Only ...
...fog lights? If yes has the switch been replaced with the wrong switch? If the switch will not pull out to turn on the fog lights the first thing that comes to mind is a bad switch. I would probably ...
...to pin 13,14. Fog light switch is "B". Because the current is many Amps, contact surfaces are heating up. After that the contact opening "C" is melting (made of plastic) so the fog light stays
...lights come on the word fog lights up but the green light above don't light up with the lights on with that on low beam. Changed relay. And fuses it sounds like you might have a bad headlamp switch
1,636 questions posted
Usually answered in minutes!
1,830 Questions
1,838 Questions
1,503 Questions
1,212 Questions
600 Questions