1986 Ford Ranger 2WD "3 oil switch" Questions

oil is required for a new AC compressor 91 ford ranger, 3.0, the system is completely empty, (replacing compressor, no oil in it) replacing compressor, new drier, orifice etc. system flushed and blown

...oil light. When it's started no lights are on. Sorry not very auto savvy and was just curious what could cause this. Thanks do you mean engine rolled over or cranked over and would not start?or is it ...

...3 or 4 times within a year. Mechanic said he replaced fuel filter, he said has good fuel pressure. Said something about a switch he either replaced, cleaned or something. He replaced distributor cap. ...

...3 mpg higher. It starts and runs great ... smooth accel., power. All the normal things are good- cap, rotor, wires, plugs, air filter, synthetic oil since new, great compression and cyinder leakdown, ...

...3 mpg higher. It starts and runs great ... smooth accel., power. All the normal things are good- cap, rotor, wires, plugs, air filter, synthetic oil since new, great compression and cyinder leakdown, ...

...oil at the cylinder of the hydraulic actuator under the hood. This actuator is directly connected to the pushrod driven by the pedal. If the actuator is leaking, you have buy a repair kit (Hyraulic ...

...cherokee 4.0L - Location of Oil Pressure Switch - Rh side of Engine block above starter, 3 wire connector 4.7L - Location of Oil Pressure Switch - RH side of motor next to oil filter, 3 wire ...

...oil on front of engine pull the ruber shroud /cover off the oil light switch ,i think the oil light switch is leaking a small amount and building up behind the cover ,throwing the oil light switch ...

oil pressure switch on a 3.1 Here's a picture of your oil pressure switch,easy to replace,just disconnect electrical connector,get wrench and remove.It's located by oil filter,it's screwed into block.

...oil pressure switch for 3 days and cant find it. Do you have to look from under the car? What engine? 4.7 liter it's right above the oil filter. Typically oil pressure sensors/switches are close ...