66' 289 4v mustang hi, just rebuilt the whole motor bored it .30, new stock cam, valve job, edelbrock,intake, carb. everything new but old points distirbutor. ran really rough. so i ordered new msd ...
...firing order on the truck engine may be different. So you have to make sure your #1 cylinder is at top dead center and route the post on the cap its pointing at to the #1 cylinder and go from there. ...
firing, order. there is no distributor. the Cam sender is timed, statically. i suspect this question comes, up during, a new timing chain, am i right? I'm told some markets, have coil packs not cops..
...5.3 and 5.7 liters and is there any obvious visual differances between the two engines? 5.7 is 60-66 PSI OR (4.2 kg/4.6 cm2) . 5.3 is 55-62 PSI (4.0kg/4.4cm2) all ican say is the 1996 z71 fuel
66 lbs pressure depending on engine load. Full pressure with return pinched off should be 75-85 or more. And if it has a fast leak down after shut off you have a leak. The 75-85 is only a check on the
66) CO (%) = 0.74 (max 0.57) NO (PPM) = 3198 (max 487) 25mph - RPM = 1685 %CO2 = 14.3 %O2 = 0.6 HC (PPM) = 174 (max 49) CO (%) = 0.76 (max 0.55) NO (PPM) = 2755 (max 774) How well does the vehicle run
...66 there may be no voltage to MAF sensor. Fuel pump? was the fuel filter changed out? could also be a fuel pressure regulator. Ignition Timing and Firing order should be looked over as well!!! light ...
...firing order was all wrong and repositioned it. It started right up and ran beautifully. Yet, I still wanted to do some more, and I went under the truck and detach the transmission rod/shaft to take ...
what is the firing order for 66 chevy truck with 327 engine
Question about Buick Cars & Trucks
...firing order dist rotation cyl 1 location 66 buick riviera 425 ? 1846572 If it was me-I would look at the distributor like hands on a clock. Remembering that there is only (8) hands though. It turns ...
516 questions posted
Usually answered in minutes!
706 Questions
694 Questions
653 Questions
589 Questions
617 Questions