2004 Ford Explorer "fuse abs explorers" Questions

...repair books Engine bay has 2 fuse boxes the small fuse box situated in engine bay appears to have 2 large relays which are ABS PUMP AND ABS CONTROL . BIG FUSE BOX has a ABS diode listed as no ...

...fuse for the ABS system in a 2007 Ford Explorer The fuse for the ABS system F33-30amp an F6-40amp in the under hood fuse box ! Is ABS light lit ? Pulling fuse's may not turn it off > There is also ...

...the fuse so the abs light wont go on, im not worried about the abs working,i just want to get the abs light off which is on all the time the sensor by the rotter was damaged by brake pad ...

...explorer I need to disconnect the fuze for abs light Not sure if there is a fuse for that. Something is wrong. If abs light is on. Not sure but I think this is in the computer brain of your

...remove the positive cable,,unless you remove the negative cable first..When you go back..Put the positive on then put the negative on..You probably spiked the ABS fuse..Try checking the fuses

...fuse to pull to disable abs system on 2006 explorer 2 wheel drive. Educate me because I know of only hydraulic ABS systems only the dash light is electric, help me. Now there might be magnets and ...

how to disable the abs on a 1999 ford explorer\ I wouldn't recommend it for a 4X4. But you can pull the fuse or unplug the ABS module.

...ABS fuse located on a 2003 ford explorer? I don't have an owners manual. fuse panel in engine compartment or the passenger side foot well Here - ...

...ABS LIGHT IS ON AND THE CRUISE CONTROL IS INOP. THE SWITCH OR WIRING TO THE SWITCH IS BAD. THERE SHOULD BE VOLTAGE IN AND OUT OF THE SWITCH IF ONLY POWER IN AND NO POWER OUT THE SWITCH IS BAD. ALSO ...

...stays on the abs light on the dash has come on and I checked the brake fluid, its ok. I checked the fuses for the ABS system and all seemed ok. What next? It could be a wheel speed sensor. have your ...